What we can make
Capabilities
The detail behind the work: our machines, the materials we work in, the tolerances we hold in production and the finishing we can arrange.
Everything in one building
Design, machining, welding, fabrication and final assembly all happen in one building, so a part never changes hands between vendors. If something needs correcting, there is one schedule and one inspection record to work from.
CNC machining
3- and 4-axis milling plus turning with live tooling. Prototype runs of one piece through mid-volume production, programmed from your solid model or straight from the print.
Welding
TIG, MIG and stick on structural and pressure-rated assemblies, with weld maps and procedure documentation where the application calls for it.
Fabrication
Shearing, press-brake forming, rolling and structural fab, taken through to a finished and finish-coated assembly.
Manufacturing & assembly
Repeat production with dedicated fixtures, routing documentation, first-article inspection, and kitted or assembled delivery.
At a glance
| Repeatable tolerance | ±0.0005" |
|---|---|
| Surface finish | To 8 Ra on request |
| Order quantities | 1 – 10,000+ |
| CNC stations | 20+ |
| Shop hours | Mon–Fri, 8am–5pm |
| Typical RFQ turnaround | 1 business day |
Stock we cut daily
Materials
If a material is not listed, ask. We handle exotics and customer-supplied stock regularly.
| Family | Grades | Notes |
|---|---|---|
| Aluminum | 6061, 7075, 2024, 5052 | High-speed milling; anodize and chem-film available. |
| Carbon & alloy steel | 1018, 1045, A36, 4130, 4140 and more | A large share of our work; structural fab and weldments, black oxide or paint. |
| Stainless | 303, 304, 316, 17-4 PH | Food, marine and medical work; passivation available. |
| Tool steel | A2, D2, O1, H13 | Machined and ground after heat treat. |
| Titanium | Grade 2, Grade 5 (6Al-4V) | Aerospace brackets and fittings; 4th-axis rotary setups. |
| Nickel alloys | Inconel 625 / 718, Monel | High-temperature and corrosive service. |
| Plastics | Delrin, PEEK, UHMW, PTFE | Segregated tooling to avoid metallic contamination. |
The shop floor
Machine fleet
A mixed fleet lets us put each part on the machine that suits it.
-
3-Axis Vertical Machining Centers
High-speed VMCs for prismatic parts, fixtures and production runs.
-
4-Axis Machining Centers
4th-axis rotary work, machining several faces of a part in one setup.
-
CNC Turning Centers
Live-tool lathes with sub-spindles for complete one-op turning.
How a job moves
From print to packed crate
Quote
Send a print, STEP file or sketch. We come back with price, lead time and any manufacturability notes within a business day.
Programming & fixturing
CAM programming and fixture design, with a documented setup sheet so the second run matches the first.
First article
One piece is fully inspected and reported before the balance of the lot is cut.
Production
Running on the fleet with in-process checks at defined frequencies.
Final inspection
Dimensional sign-off against the print, with documentation packaged to your requirement.
Finish & ship
Coating, plating, assembly and kitting arranged, then packed for transport.
Finishing we arrange
- Anodize: clear, black and hard-coat
- Chem-film / Alodine
- Powder coat and wet paint
- Zinc, nickel and chrome plating
- Black oxide and passivation
- Heat treat and stress relief
- Bead blast, tumble and hand polish
Outside processing goes through partners we have vetted, and it stays on our inspection record.
Send us a print. We’ll send back a quote.
Most RFQs answered within one business day. NDAs available on request.
Request a Quote